SRW series
Closed systems
A central bore goes through this system, to make it possible to install it on a rotating axe.
SRW slip-rings are closed components with individual positioning and by default with IP 64 protection.
The slip-rings can be installed on a central rotating axe if desired. There are several axes and flange orientation possibilities. These components will be matched to your desired number of poles, your current load and the nature of the signals that are transmitted.
A combination of media transmitters for air, water or hydraulic oil is possible.
Note: Due to its hollow nature this slip-ring is larger and therefore a more expensive solution. These slip-rings should be used if the type SRK is not possible.
Types of electrical connection
Dimension
Overview of SRW slip-ring types
Type | Casing-ø | Possible number of poles | Remark |
---|---|---|---|
SRK 80 | 80 mm | 2- to 36-poles | depending on the current load and |
SRK 100 | 100 mm | 2- to 60-poles | depending on the current load and |
SRK 150 | 150 mm | 2- to 80-poles | depending on the current load and |
SRK 200 | 200 mm | 2- to 200-poles | depending on the current load and |
SRK 250 | 250 mm | 2- to 250-poles | depending on the current load and |
SRK 300 | 300 mm | 2- to 250-poles | depending on the current load and |
SRK 350 | 350 mm | 2- to 250-poles | depending on the current load and |
SRK 400 | 400 mm | 2- to 250-poles | depending on the current load and |
SRK 450 | 450 mm | 2- to 250-poles | depending on the current load and |
We will send you 3D models – on request |